A Study on Analysis of Development Effectiveness of Composite Brake through Real Car Comparison and Verification

J. H. Shim; Y. U. Kwon; J. H. Lee; U. H. Shin

doi:10.22680/kasa2022.14.3.041

All Issue

2022 Vol.14, Issue 3 Preview Page Next Page

A Study on Analysis of Development Effectiveness of Composite Brake through Real Car Comparison and Verification 실차 비교 및 검증을 통한 복합재 브레이크의 개발 효용성 분석에 관한 연구

30 September 2022. pp. 41-47

PDF XML

Abstract

Composite material is recently very important material for eco-friendly vehicles because of its excellent mechanical property and lightweight effect. So, many research results have been recently published for developing the composite material to apply vehicles. In this paper, new brake system is presented using composite material to response this situation. And advantages in terms of performance compared to competitive company will be discussed in depth to verify superiorities of the new composite brake. To do so, composite brake systems which have the same size as the competitive company to the same vehicle is applied. And superiorities through a variety of test results are presented. First, normal braking performances are compared with competitive company through braking effect, heat capacity and friction test, Second, circuit driving and high speed fade test are also verified with competitive company to confirm harsh braking performances for the new composite brake system. Finally, the effects of applying the composite brake to automobile industry like electric car are analyzed.

Keywords

Composite Brake

Mono-Block Caliper

Friction Characteristics

Braking Effect

Heat Capacity

Circuit Driving

키워드

복합재 브레이크

모노블록 캘리퍼

마찰 특성

제동 효력

열용량

서킷 주행

References

M. Krupka, A. Kienzle, 2000, "Fiber Reinforced Ceramic Composite for Brake Discs", SAE International, 2000-01-2761. 10.4271/2000-01-2761

R. Gadow, 2003, "Advanced Manufacturing of Ceramic Matrix Composite for Disk Brake Rotors", SAE International, 2003-01-1178. 10.4271/2003-01-1178

P. Ioannidis, D. C Barton, P. C. Brooks, 2005, "Noise and Vibration Characterization of Cast Iron and Siliconised Carbon Composite Brake Rotors", SAE International, 2005-01-2313. 10.4271/2005-01-2313

G. P. Ostermeyer, K. Bode, 2009, "Tribological Aspects of Carbon Ceramic and Cast-Iron Brake Rotors with Organic Pad Materials in Simulation and Measurement", SAE International, 2009-01-3010. 10.4271/2009-01-3010

A. L. Swarbrick, 2012, "Surface Conditioning of Carbon-Fiber Ceramic Rotors against Organic Pads", SAE International, 2012-01-1833. 10.4271/2012-01-1833

D. G. Ko, S. J. Yoon, 2015, "Numerical Study on the Flow Characteristics according to the Ventilation Holes Shape of the Carbon Composite Brake Disk, Transaction of KSAE, Vol. 23, No2, pp. 191~198. 10.7467/KSAE.2015.23.2.191

J. H. Shim, D. W. Lim, E. J. Hyun, K. J. Kim, G. G. Jung, H. K. Kim, 2016, "A study on braking characteristics control of carbon ceramic composite for brake reliability improvement of luxury car and future technology evolution trend prediction", Transactions of KSAE, Vol. 24, No. 6, pp. 684~693. 10.7467/KSAE.2016.24.6.684

J. H. Shim, U. H. Shin, J. H. Lee, G. B. Jeon, D. W. Lim, 2019, "A Study on Verification of Actual Car Effectiveness for Composite Brake", Transaction of KSAE, Vol. 27, No. 4, pp. 259~266. 10.7467/KSAE.2019.27.4.259

J. H. Shim, J. H. Lee, 2019, "A Study on Improvement of Cooling Performance through Vent Structure Optimization of Carbon Ceramic Composite Disc", Journal of auto-vehicle safety association, Vol. 11, No. 1, pp. 23~29.

J. H. Shim, U. H. Shin, J. H. Lee, 2020, "A Study on Development of Composite Brake System through Analysis of advanced Braking Performance Factors", Journal of auto-vehicle safety association, Vol. 12, No. 1, pp. 26~32.

J. H. Shim, U. H. Shin, J. H. Lee, D. W. Lim, 2021, "A Study on Improvement of Cooling Performance of Composite Brake System for Vehicle Standardization", Transaction of KSAE, Vol. 29, No. 6, pp. 533~539. 10.7467/KSAE.2021.29.6.533

J. H. Shim, U. H. Shin, J. H. Lee, D. W. Lim, 2021, "A Study on Squeal Noise Robustness Analysis to Improvement Composite Brake Stability of High Performance and Eco-Friendly Vehicles, Journal of auto-vehicle safety association, Vol. 13, No. 3, pp. 32~40.

Information

Publisher :Korean Auto-vehicle Safety Association
Publisher(Ko) :한국자동차모빌리티안전학회
Journal Title :Journal of Auto-vehicle Safety Association
Journal Title(Ko) :자동차안전학회지
Volume : 14
No :3
Pages :41-47
Received Date : 2022-03-31
Revised Date : 2022-08-02
Accepted Date : 2022-08-25
DOI :https://doi.org/10.22680/kasa2022.14.3.041

Journal of Auto-vehicle Safety Association ISSN:2005-9396(Print) 자동차안전학회지

All Issue